Vertical Door Loader
Accurately size and bevel your interior or exterior doors to width with the RUVO 1100 Door Sizer and Beveler
The RUVO 1100 Door Sizer and Beveler is perfect for sizing the width of both interior and exterior doors.
The RUVO 1100 was built for high speed, accuracy and efficiency with smooth cuts and a trouble-free operation. It can make 90 ° or bevel cuts and it comes with an easily adjustable bevel angle. It can easily perform high speed routing of the top and bottom corners with the solid cutter-head equipped with four carbide-tipped knives.
The RUVO 1100 accepts either exterior or interior doors and feeds them automatically. No adjustments are required for doors of the same width. This means you can size and bevel (0-3 degrees) stacks of mixed doors without losing valuable time.
The cutter carriage glides on ball bearings, permitting the operator to easily adjust for any door width between 16" and 48", in 2 increments.
All electric switches are located in the control box for easy accessibility. Included are magnetic starters and a stop button allowing you to instantly halt operations if necessary.
Smooth, vibration free operations are asured because the RUVO 1100 is well-braced and has a firm wide stance. Bolts at the base of the legs allow for leveling of the machine on uneven floors.
- Electrical Standard: 230V, 3PH, 60HZ, 11.6AMPs
115V, 1PH, 60HZ, 5.6AMPs
- Air Requirements: 12 CFM @ 120 PSI, at machine with 3/4" feeder air line
- Beveler Motor: 3HP 3450 RPM
- Die Grinders: 1HP, 1725 RPM
- Machine Size: 10'L x 6'W x 5'H
- Machine Weight: 1250 lbs.
- Door Size: 16" to 48" wide x any length
- Variable speed in-feed: 11' to 45' per minute
- Outside Dimensions: 12" x 10" x 18"
*Specifications subject to change without notice.