The RUVO 1300 Double-End Trim Saw accurately and efficiently trims doors on the top and bottom. It allows a single operator to do a day's work in only a few hours.

The RUVO 1300 can be used separately or in conjunction with the RUVO 1100.

It has a 0-15° bevel on the station head, an adjustable door stop, and it can cut interior and exterior doors.

A rack and pinion adjustment allows the RUVO 1300 to accept doors ranging from 6'0" to 8'0" in length. Once the desired length is set on the built-in scale, the adjustment is locked into place with a convenient T-clamp.

The RUVO 1300 is equipped with four 8", carbide-tipped saws powered by 2,3 or 5 HP motors. When a door is advanced, the saws cut from the top and bottom sides to guarantee a smooth even edge on both sides of the door.

The RUVO 1300 is designed to allow sawdust to fall through to the floor, avoiding a hazardous build-up of debris around the machine's parts.

A scale attached to the frame permits rapid adjustment for door length.

Specifications:

• Electrical Standard: 120 Volts, single phase, 10 AMPs
• Air Requirements: .1 CFM
• Motor: 2,3 or 5 HP
• Machine Size: 9'0" L x 5'0" W x 4'0"H
• Machine Weight: 1,100 lbs.

*Specifications subject to change without notice.

Capabilities:

• Door Height: 6' to 8'
• Door Width: 16" to 48"
• Blades: 4-8" carbide tipped saw blades